Do It Yourself: Yes
Difficulty: Easy
It is time for me to open up the front door panel on my car. I noticed something missing when assembling the front door panel when my car was sent to do bodywork last month.
Well, we need these tools to do this task....
- Torx T20 driver
- Flat screwdriver
- A piece of cloth
Start off by removing the tweeter cover.
Carefully pull the top and bottom part of the cover. Watch out for the cablesUsing Torx T20 driver, unscrew two screws behind the tweeter cover and on the door panel near the middle of the A pillar. Refer to this link for the rest of the process.
There are three screws and one inner handle cover that need to be removed from the panel
This is the missing part
Another missing clip, I've total of two missing clips on each of the front door panel
These are the clips, cost me RM0.60 each
The view after the door panel removed
To remove the speaker, use T20 driver. No need to remove the sponge unless you wanted to change the speaker. The speaker is secured by four screws
The speaker mounting view
Speaker label
Inner view of the door, nothing much to shout aboutRefitting is the reverse of the removal.
No comments:
Post a Comment